using System;
using System.Collections.Generic;
using System.Data;
using System.Windows.Forms;
using DevExpress.XtraEditors;
using ICSSoft.Base.Config.AppConfig;
using ICSSoft.Base.Config.DBHelper;
using ICSSoft.Base.ReferForm.AppReferForm;
using ICSSoft.Frame.Data.Entity;
using ICSSoft.Frame.Data.BLL;
namespace ICSSoft.Frame.APP
{
    public partial class FormICSHeatTreatmentAdd : DevExpress.XtraEditors.XtraForm
    {
        int flag;
        string ID;
        string Transno;
        string EQPCode;
        private DataTable data =new DataTable();
        ICSOpFile entity = new ICSOpFile();

        #region 构造函数
        public FormICSHeatTreatmentAdd()
        {
            InitializeComponent();
            flag = 0;
        }
        public FormICSHeatTreatmentAdd(string id, string transno,string eqpcode)
        {
            InitializeComponent();
            flag = 1;
            ID = id;
            EQPCode = eqpcode;
            Transno = transno;
        }
        #endregion

        #region 关闭 退出
        private void btnClose_Click(object sender, EventArgs e)
        {
            this.Close();
        }
        #endregion

        #region 移动窗体
        private const int WM_NCHITTEST = 0x84;
        private const int HTCLIENT = 0x1;
        private const int HTCAPTION = 0x2;
        //首先必须了解Windows的消息传递机制，当有鼠标活动消息时， 
        //系统发送WM_NCHITTEST 消息给窗体作为判断消息发生地的根据。 nchittest
        //假如你点击的是标题栏，窗体收到的消息值就是 HTCAPTION ， 
        //同样地，若接受到的消息是 HTCLIENT，说明用户点击的是客户区，也就是鼠标消息发生在客户区。 

        //重写窗体，使窗体可以不通过自带标题栏实现移动
        protected override void WndProc(ref Message m)
        {


            //当重载窗体的 WndProc 方法时，可以截获 WM_NCHITTEST 消息并改些该消息， 
            //当判断鼠标事件发生在客户区时，改写改消息，发送 HTCAPTION 给窗体， 
            //这样，窗体收到的消息就时 HTCAPTION ，在客户区通过鼠标来拖动窗体就如同通过标题栏来拖动一样。 
            //注意：当你重载 WndProc 并改写鼠标事件后，整个窗体的鼠标事件也就随之改变了。 
            switch (m.Msg)
            {
                case WM_NCHITTEST:
                    base.WndProc(ref m);
                    if ((int)m.Result == HTCLIENT)
                        m.Result = (IntPtr)HTCAPTION;
                    return;
            }
            //拦截双击标题栏、移动窗体的系统消息  
            if (m.Msg != 0xA3)
            {
                base.WndProc(ref m);
            }

        }
        #endregion

        #region 保存
        private void save_Click(object sender, EventArgs e)
        {
            entity.MUSER = AppConfig.UserId;
            entity.MUSERName = AppConfig.UserName;
            entity.MTIME = Convert.ToDateTime(AppConfig.GetSeverDateTime("yyyy-MM-dd hh:mm:ss").ToString());
            string mocode = "";
            string moseq = "";
            string eqpcode = "";
            string mover = "";
            string eqpname = "";
            try
            {
                List<ICSOpFile> modelList = new List<ICSOpFile>();
                ICSOpFile model = new ICSOpFile();
                if (txtEQPCode.Text.Trim() == "")
                {
                    ICSBaseSimpleCode.AppshowMessageBox("设备号不能为空!!!");
                    return;
                }
                if (!string.IsNullOrEmpty(ID) && gridView4.RowCount <= 0)
                {
                    ICSBaseSimpleCode.AppshowMessageBox("产品跟踪单信息不能为空!!!");
                    return;      
                }

                if (data.Rows.Count>0)
                {
                    #region 表中有值
                    for (int i = 0; i < data.Rows.Count; i++)
                    {
                        //if (mocode != gridView4.GetRowCellValue(i, colMOCODE).ToString() || moseq != gridView4.GetRowCellValue(i, colMOSEQ).ToString() ||
                        //    eqpcode != gridView4.GetRowCellValue(i, colEQPCode).ToString() || mover != gridView4.GetRowCellValue(i, colMOVER).ToString() ||
                        //    eqpname != gridView4.GetRowCellValue(i, colEQPName).ToString()
                        //    )
                        //{
                        //    if (i > 0)
                        //    {
                        //        modelList.Add(model);
                        //        model = new ICSOpFile();
                        //    }
                        //    mocode = gridView4.GetRowCellValue(i, colMOCODE).ToString();
                        //    moseq = gridView4.GetRowCellValue(i, colMOSEQ).ToString();
                        //    eqpcode = gridView4.GetRowCellValue(i, colEQPCode).ToString();
                        //    mover = gridView4.GetRowCellValue(i, colMOVER).ToString();
                        //    eqpname = gridView4.GetRowCellValue(i, colEQPName).ToString();

                        //    model.MOCODE = mocode;
                        //    model.MOSEQ = moseq;
                        //    model.EQPCode = eqpcode;
                        //    model.EATTRIBUTE2 =mover; //零件号
                        //    model.EATTRIBUTE3 = eqpname;//设备名称
                        //}
                        //else
                        //{
                        if (model.LOTNOs != null)
                        {
                            model.LOTNOs += gridView4.GetRowCellValue(i, colLotNO).ToString() + ";";
                            if (!model.MOCODE.Contains(data.Rows[i]["MOCODE"].ToString()))
                            {
                                model.MOCODE += gridView4.GetRowCellValue(i, colMOCODE).ToString() + ";";
                            }
                            if (!model.MOSEQ.Contains(data.Rows[i]["MOSEQ"].ToString()))
                            {
                                model.MOSEQ += gridView4.GetRowCellValue(i, colMOSEQ).ToString() + ";";
                            }
                            if (!model.EQPCode.Contains(data.Rows[i]["EQPCode"].ToString()))
                            {
                                model.EQPCode += gridView4.GetRowCellValue(i, colEQPCode).ToString() + ";";
                            }
                            if (!model.EATTRIBUTE2.Contains(data.Rows[i]["VenderLotNo"].ToString()))
                            {
                                model.EATTRIBUTE2 += gridView4.GetRowCellValue(i, gridColumn11).ToString() + ";";
                            }
                            if (!model.EATTRIBUTE3.Contains(data.Rows[i]["EQPName"].ToString()))
                            {
                                model.EATTRIBUTE3 += gridView4.GetRowCellValue(i, colEQPName).ToString() + ";";
                            }
                        }
                        else
                        {

                            model.MOCODE += gridView4.GetRowCellValue(i, colMOCODE).ToString() + ";";
                            model.MOSEQ += gridView4.GetRowCellValue(i, colMOSEQ).ToString() + ";";
                            model.EQPCode += gridView4.GetRowCellValue(i, colEQPCode).ToString() + ";";
                            model.EATTRIBUTE2 += gridView4.GetRowCellValue(i, gridColumn11).ToString() + ";";
                            model.EATTRIBUTE3 += gridView4.GetRowCellValue(i, colEQPName).ToString() + ";";
                            model.LOTNOs += gridView4.GetRowCellValue(i, colLotNO).ToString() + ";";
                        }
                        //}                
                    }
                    #endregion
                }
                else
                {
                    model.EQPCode = txtEQPCode.Text.Trim();
                    model.EATTRIBUTE3= txtEQPName.Text.Trim();
                }               
                model.ID = AppConfig.GetGuid();
                //model.MOCODE = txtMOCode.Text.Trim();
                //model.MOSEQ = Convert.ToInt16(txtMORow.Text.Trim());
                //model.EQPCode = txtEQPCode.Text.Trim();
                model.MUSER = AppConfig.UserId;
                model.MUSERName = AppConfig.UserName;
                model.MTIME = AppConfig.GetSeverDateTime("yyyy-MM-dd HH:mm:ss");
                model.WorkPoint = AppConfig.WorkPointCode;
                modelList.Add(model);

                if (modelList.Count <= 0)
                {
                    ICSBaseSimpleCode.AppshowMessageBox("请选择数据!!!");
                    return;
                }

                if (flag == 0)
                {
                    //ICSHeatTreatmentBLL.AddList(modelList, AppConfig.AppConnectString);
                    ICSBaseSimpleCode.AppshowMessageBox("炉号新增成功!!!");
                    this.Close();
                    this.DialogResult = DialogResult.Yes;
                }
                else if (flag == 1)
                {
                    //ICSHeatTreatmentBLL.AddSample(modelList, ID, Transno, AppConfig.AppConnectString);
                    ICSBaseSimpleCode.AppshowMessageBox("试样号新增成功!!!");
                    this.Close();
                    this.DialogResult = DialogResult.Yes;
                }
            }
            catch (Exception ex)
            {
                ICSBaseSimpleCode.AppshowMessageBox(ex.Message);
            }
        }
        #endregion

        #region 取消
        private void can_Click(object sender, EventArgs e)
        {
            this.Close();
        }
        #endregion

        #region 双击
        private void grdDetail_DoubleClick(object sender, EventArgs e)
        {
            try
            {
                if (grdDetail.FocusedRowHandle < 0)
                {
                    return;
                }
                if (txtMOCode.Text == "")
                {
                    ICSBaseSimpleCode.AppshowMessageBox("工单号不能为空!");
                    return;
                }
                if (txtEQPCode.Text == "")
                {
                    ICSBaseSimpleCode.AppshowMessageBox("设备号不能为空!");
                    return;
                }
                if (grdDetail.FocusedColumn == colisSelect)
                {
                    if (grdDetail.GetRowCellValue(grdDetail.FocusedRowHandle, colisSelect).ToString() == "")
                    {
                        grdDetail.SetRowCellValue(grdDetail.FocusedRowHandle, colisSelect, "Y");
                        DataRow[] drs = data.Select("LotNO='" + grdDetail.GetRowCellValue(grdDetail.FocusedRowHandle, colLotNO).ToString() + "'");
                        if (drs.Length<=0)
                        {
                            DataRow dr = data.NewRow();
                            dr["LotNO"] = grdDetail.GetRowCellValue(grdDetail.FocusedRowHandle, colLotNO).ToString();
                            dr["ItemCode"] = grdDetail.GetRowCellValue(grdDetail.FocusedRowHandle, colMCODE).ToString();
                            dr["INVNAME"] = grdDetail.GetRowCellValue(grdDetail.FocusedRowHandle, colINVNAME).ToString();
                            dr["INVSTD"] = grdDetail.GetRowCellValue(grdDetail.FocusedRowHandle, colINVSTD).ToString();
                            dr["INVUOM"] = grdDetail.GetRowCellValue(grdDetail.FocusedRowHandle, colINVUOM).ToString();
                            dr["num"] = grdDetail.GetRowCellValue(grdDetail.FocusedRowHandle, colnum).ToString();
                            dr["VenderLotNo"] = grdDetail.GetRowCellValue(grdDetail.FocusedRowHandle, colVenderLotNo).ToString();
                            dr["INVEXPORTIMPORT"] = grdDetail.GetRowCellValue(grdDetail.FocusedRowHandle, colINVEXPORTIMPORT).ToString();
                            dr["MOCODE"] = txtMOCode.Text.Trim();
                            dr["MOVER"] = txtMoverCode.Text.Trim();
                            dr["EQPCODE"] = txtEQPCode.Text.Trim();
                            dr["EQPName"] = txtEQPName.Text.Trim();
                            dr["MOSEQ"] = txtMORow.Text.Trim();
                            data.Rows.Add(dr);
                            gridControl1.DataSource = data;
                        }                                                                                                               
                    }
                    else
                    {
                        grdDetail.SetRowCellValue(grdDetail.FocusedRowHandle, colisSelect, "");
                    }
                }
            }
            catch (Exception ex)
            {
                ICSBaseSimpleCode.AppshowMessageBox(ex.Message);
            }
        }
        #endregion

        #region 页面加载
        private void FormICSItenLotAdd_Load(object sender, EventArgs e)
        {
            init();
            load();
            //新增试样号，设备号不可选
            if (!string.IsNullOrEmpty(EQPCode))
            {
                txtEQPCode.Text = EQPCode;
                txtEQPCode.Enabled = false;
            }
        }
        #endregion

        #region 初始化查询条件
        private void init()
        {
            string sql = @" SELECT  MOCODE+'-'+MOSEQ AS 工单,MOCODE AS 工单号,MOSEQ AS 生产订单行号,ITEMCODE AS 存货编码,b.INVNAME AS 存货名称,MOPLANQTY AS 工单数量,b.INVSTD AS 规格型号,
                                    MOVER AS 零件号,MOTYPE AS 工单类型
                                    FROM ICSMO a
                                    INNER JOIN ICSINVENTORY b ON a.ITEMCODE=b.INVCODE ORDER BY MOCODE,MOSEQ";
            DataTable dt = DBHelper.ExecuteDataset(AppConfig.AppConnectString.ToString(), CommandType.Text, sql).Tables[0];
            txtMOCode.Properties.ValueMember = "工单";
            txtMOCode.Properties.DisplayMember = "工单号";
            txtMOCode.Properties.DataSource = dt;
            txtMOCode.Properties.NullText = "";//空时的值    
            txtMOCode.Properties.ImmediatePopup = true;//输入值是否马上弹出窗体  
            txtMOCode.Properties.ValidateOnEnterKey = true;//回车确认  
            txtMOCode.Properties.TextEditStyle = DevExpress.XtraEditors.Controls.TextEditStyles.Standard;//要使用户可以输入，这里须设为Standard  
            txtMOCode.Properties.AllowNullInput = DevExpress.Utils.DefaultBoolean.True; //可用Ctrl + Delete清空选择內容 
            //自适应宽度
            txtMOCode.Properties.BestFitMode = DevExpress.XtraEditors.Controls.BestFitMode.BestFitResizePopup;


            #region 设备
            sql = @"select EQPCode as 设备号,EQPName as 设备名称
                                from ICSEquipment";
            dt = DBHelper.ExecuteDataset(AppConfig.AppConnectString.ToString(), CommandType.Text, sql).Tables[0];
            txtEQPCode.Properties.ValueMember = "设备号";
            txtEQPCode.Properties.DisplayMember = "设备号";
            txtEQPCode.Properties.DataSource = dt;
            txtEQPCode.Properties.NullText = "";//空时的值    
            txtEQPCode.Properties.ImmediatePopup = true;//输入值是否马上弹出窗体  
            txtEQPCode.Properties.ValidateOnEnterKey = true;//回车确认  
            txtEQPCode.Properties.TextEditStyle = DevExpress.XtraEditors.Controls.TextEditStyles.Standard;//要使用户可以输入，这里须设为Standard  
            txtEQPCode.Properties.AllowNullInput = DevExpress.Utils.DefaultBoolean.True; //可用Ctrl + Delete清空选择內容 
            //自适应宽度
            txtEQPCode.Properties.BestFitMode = DevExpress.XtraEditors.Controls.BestFitMode.BestFitResizePopup;
            #endregion

        }
        #endregion

        #region 工单号改变
        private void txtMOCode_EditValueChanged(object sender, EventArgs e)
        {
            try
            {
                GridLookUpEdit edit = sender as GridLookUpEdit;
                if (edit.EditValue != null && edit.EditValue.ToString() != "" && edit.EditValue.ToString() != "nulltext")
                {
                    var o = edit.Properties.GetRowByKeyValue(edit.EditValue);
                    if (o is DataRowView)
                    {
                        DataRowView RowView = o as DataRowView;
                        txtMORow.Text = RowView.Row["生产订单行号"].ToString();
                        txtCode.Text = RowView.Row["存货编码"].ToString();
                        txtcInvName.Text = RowView.Row["存货名称"].ToString();
                        txtMoverCode.Text = RowView.Row["零件号"].ToString();
                        txtcInvStd.Text = RowView.Row["规格型号"].ToString();
                        txtMOType.Text = RowView.Row["工单类型"].ToString();
                        txtiQuantity.Text = RowView.Row["工单数量"].ToString();

                        string sql = @"SELECT '' as isSelect,a.LotNO,a.ItemCode,b.INVNAME,b.INVSTD,a.LOTQTY,b.INVUOM,
                                        CONVERT(NUMERIC(10,3),(a.LOTQTY*a.EATTRIBUTE3)) AS num,b.INVEXPORTIMPORT,
                                        a.VenderLotNO as VenderLotNo
                                        FROM ICSITEMLot a
                                        INNER JOIN ICSINVENTORY b ON a.ItemCode=b.INVCODE 
                                        WHERE a.TransNO='{0}' AND a.TransLine='{1}' AND ISNULL(a.EATTRIBUTE6, '')<>''
                                        ORDER BY a.LotNO";
                        sql = string.Format(sql, txtMOCode.Text.Trim(), txtMORow.Text.Trim());
                        DataTable dt = DBHelper.ExecuteDataset(AppConfig.AppConnectString.ToString(), CommandType.Text, sql).Tables[0];
                        grvDetail.DataSource = dt;
                        grdDetail.BestFitColumns();
                    }
                }
            }
            catch (Exception ex)
            {
                ICSBaseSimpleCode.AppshowMessageBox(ex.Message);
            }
        }
        #endregion

        #region 设备号改变
        private void txtEQPCode_EditValueChanged(object sender, EventArgs e)
        {
            try
            {
                string Code = txtEQPCode.Text.ToString();
                string sql = @"select EQPCode as 设备号,EQPName as 设备名称
                                from ICSEquipment
                                WHERE EQPCode='{0}'";
                sql = string.Format(sql, Code);
                DataTable dt = DBHelper.ExecuteDataset(AppConfig.AppConnectString.ToString(), CommandType.Text, sql).Tables[0];
                if (dt != null && dt.Rows.Count > 0)
                {
                    txtEQPName.Text = dt.Rows[0]["设备名称"].ToString();
                }
            }
            catch (Exception ex)
            {
                ICSBaseSimpleCode.AppshowMessageBox(ex.ToString());
            }
        }
        #endregion

        private void load()
        {
            string sql = @"SELECT '' as isSelect,a.LotNO,a.ItemCode,b.INVNAME,b.INVSTD,a.LOTQTY,b.INVUOM,CONVERT(NUMERIC(10,3),(a.LOTQTY*a.EATTRIBUTE3)) AS num,b.INVEXPORTIMPORT
                        ,c.MOCODE,a.VenderLotNO as VenderLotNo,c.MOVER,a.EATTRIBUTE1 as EQPCODE,a.EATTRIBUTE2 as EQPName,c.MOSEQ
                        FROM ICSITEMLot a
                        INNER JOIN ICSINVENTORY b ON a.ItemCode=b.INVCODE 
                        LEFT JOIN ICSMO c ON a.TransNO=c.MOCODE AND a.TransLine=c.MOSEQ
                        WHERE 1!=1
                        ORDER BY a.LotNO";
            DataTable dt = DBHelper.ExecuteDataset(AppConfig.AppConnectString.ToString(), CommandType.Text, sql).Tables[0];
            data = dt;
        }

        #region 删除
        private void repositoryItemButtonEdit1_ButtonClick(object sender, DevExpress.XtraEditors.Controls.ButtonPressedEventArgs e)
        {
            gridView4.DeleteRow(gridView4.FocusedRowHandle);
        }
        #endregion

    }
}